COUPLINGS are used in industry for transmission of torque, speed and motion from one shaft to the other. Any misalignment in two shafts brings loss of performance in terms of loss of power, damage of shafts and bearings, generation of heat and noise and ultimately damaging of equipment. The PMP Automation’s flexible shaft couplings are being used to overcome misalignments in the tow shafts and other transfer of precise motion from one shaft to other. Applications where transmission of precision digital/analog information + torque between shafts is required these are to be used. The PMP Automation flexible couplings transmit information between two shafts precisely besides torque. These are flexible in lateral and angular position movement but torsionally stiff in rotary motion. The shaft couplings series are as i.e. Aluminum screw type and as i.e. aluminum flange type version. The Company offers helical/spiral cut couplings which are comparatively more flexible in axial and angular movements as compared to our slit cut versions which are torsionally rigid. Features: Monolith construction backlash free – Precision information transmission in both directions of motion without loss. This is possible due to the monolith construction of the body; Torsionally flexible/stiff – Producing constant velocity assuring smooth bearing loads; Takes misalignment – lateral (typically 0.2 mm) & angular (typically 5 degrees); Permits slight axial movement; Compact – space saving and light-weight with low inertia; Suitable as diameter converter; Precise concentric integral set screw or collets/flange type clamping; Import substitute available. Applications: Shaft encoders; Tachno-generators; Potentiometers & variacs; Stepper & synchronous motors; Damper & fan drives; All rotary precision position transmitters